Magellan GPS Tracker - Manual (Page 23)

Magellan GPS Tracker 13
Basic Operation 3
Power Up Sequence
The receiver is powered up by pressing PWR
(power). On power up, the GPS Tracker will
display the Magellan logo/start up animation
momentarily and then switch to the STATUS
screen. The receiver begins searching the sky
for satellites and begins the process of comput-
ing a position fix.
Navigation Screens
The nine NAV (navigation) screens (STATUS, POSITION, NAV 1, COM-
PASS, NAV 2, PLOT, ROAD, SPEED and TIME ) provide you with neces-
sary information you will need to use the GPS Tracker as a navigational tool.
NAV screens can be viewed by pressing NAV from any screen. You can scroll
through the NAV screens by repeatedly pressing NAV or the UP/DOWN
ARROWs from any NAV screen.
All screens, except the STATUS and POSITION screens, can be disabled by
turning them off in the NAV SCREENS portion of SETUP.
MAGELLAN
TRACKER