Muratec MFX-3050 - Manual (Page 136)

Using Your Printer with a Macintosh
40
10
Using Your Printer with
a Macintosh
The MFX-3050 supports Macintosh systems with a built-in USB
interface or a 10/100 Base-TX network interface card. When
you print a file from a Macintosh computer, you can use the
PostScript driver by installing the PPD file.
This chapter includes:
• Installing Software for Macintosh
• Setting Up the Printer
• Printing
• Scanning
Installing Software for
Macintosh
The PostScript driver CD-ROM that came with your machine
provides you with the PPD file to use the PS driver, Apple
LaserWriter driver, for printing on a Macintosh computer.
Also, it provides you with the Twain driver for scanning on a
Macintosh computer.
1
Connect your machine to the computer using the USB
cable or the Ethernet cable.
2
Turn on your computer and the machine.
3
Insert the PostScript driver CD-ROM which came with your
machine into the CD-ROM drive.
4
Double-click the Samsung_MFP on your Macintosh
desktop.
5
Double-click the MAC_Installer folder.
6
Double-click the Samsung_MFP Installer OSX icon.
7
Click Continue.
8
Click Install.
9
After the installation is finished, click Quit.