Using the unified driver configurator, Opening the unified driver configurator, Printers configuration – Muratec MFX-3050 User Manual

Page 130

Using Your Printer in Linux

Using the Unified Driver
Configurator

Unified Linux Driver Configurator is a tool primarily intended for

configuring Printer or MFP devices. Since an MFP device
combines the printer and scanner, the Unified Linux Driver
Configurator provides options logically grouped for printer and

scanner functions. There is also a special MFP port option
responsible for the regulation of access to an MFP printer and
scanner via a single I/O channel.
After installing the Unified Linux driver (see page A.3), the
Unified Linux Driver Configurator icon will automatically be
created on your desktop.

Opening the Unified Driver
Configurator

Double-click Unified Driver Configurator on the
desktop.
You can also click the Startup Menu icon and select
Samsung Unified Driver and then Unified Driver

Configurator.

Press each button on the Modules pane to switch to the
corresponding configuration window.

You can use the onscreen help by clicking Help.

After changing the configurations, click Exit to close the
Unified Driver Configurator.

Printers Configuration button

Scanners Configuration button
(for MFP device only)

Ports Configuration button

Printers Configuration

Printers configuration has the two tabs; Printers and Classes.

Printers Tab

You can see the current system’s printer configuration by
clicking on the printer icon button on the left side of the Unified

Driver Configurator window.

You can use the following printer control buttons:
• Refresh: renews the available printers list.
• Add Printer: allows you to add a new printer.
• Remove Printer: removes the selected printer.
• Set as Default: sets the current printer as a default

printer.

• Stop/Start: stops/starts the printer.
• Test: allows you to print a test page to check if the

machine is working properly.

• Properties: allows you to view and change the printer

properties. For details, see page 36.

Shows all of the
installed printer.

Switches to Printer
configuration.

Shows the status,
model name and
URI of your printer.