Motorola C200 - Manual (Page 22)

22 - Using Your Phone
Using Your Phone
Turning on the Phone
Press and hold ( to turn your phone on.
1 Enter your PIN. If you type a wrong number while entering your
PIN, delete the wrong number by pressing
& (
'(/
). When
done, press $ (
2.
) or ) to confirm.
Tip: PIN (Personal Identification Number) is a password provided
by your network operator. With your PIN, you can use your SIM
card and access the services offered by your operator.
Note: If you enter a wrong PIN three times in a row, your SIM card
will be blocked. To unblock the SIM card, you need to enter the
PUK (Personal Unblocking Key) of the card. Please call the
operator, and ask for PUK.
Making a Phone Call
1 Once your PIN is accepted, the phone will start searching for
your designated network automatically, as
w indicates. This
may take a few seconds. When receiving network signals
successfully, the phone beeps twice with its LCD display
showing the network you connect to and then goes into idle
mode.
2 Now you can dial a desired number using the keys on the
keypad. Press
& (
'(/
) to delete wrong digits. Press )
to send your call.
Note: When network service is not available, no signal level will be
displayed on the screen.
Note: When connected to a network you do not have access rights
to, you will only be able to make emergency calls. The signal
strength for this network will still be displayed on the screen.
C200.book Page 22 Wednesday, August 27, 2003 4:50 PM