Monessen Hearth BWBC500MHB - Manual (Page 24)

24 61D0087
GLASS DOOR INSTALLATION
REMOVING GLASS DOORS
You need to remove the glass doors to replace a damaged glass
panel, to replace a refractory component inside the fireplace, or
to more easily access glass panels for cleaning purposes.
Always use gloves and eye protection
when handling glass doors in case
glass is accidentally broken while
handling.
W
ARNING
Note: An adjustable spring clip is installed on each side of the top track for the glass doors. The spring
clips are used to hold the doors in place and keep the doors aligned. A door closure spring is
installed in the center of the top track. This closure clip provides friction to the door guide pins,
which help hold the doors together properly.
1. To remove a left or right glass door assem-
bly, open the bi-fold door assembly to be
removed.
2. Depress the top adjustable spring clip until the
upper pivot pin disengages the spring clip. See
Figure 27.
3. Swing the top of the door assembly towards
the center and lift it out of the bottom pivot
bushing. See Figure 27.
4. After removing a door assembly from the
fireplace, be careful not to damage the door
assembly by hitting or scratching it against
other surfaces or objects.
Figure 27 -
Removing Glass Doors
Adjustable Spring Clip
Pivot
Bushing
Door
Assembly
Door Pivot
Pin
Bottom
Panel
Adjustable
Flat Clip