MicroNet Technology SP3367A User Manual
Page 61

60
7.
Initialization of the ADSL connection failed.
STEPS CORRECTIVE
ACTION
1
Check the cable connections between the ADSL port and the
wall jack. The ADSL LED on the rear panel of the router should
be on.
2
Check VPI, VCI, type of encapsulation and type of multiplexing
settings are the same as what you collected from your ISP.
3
Restart the router. If you still have problems, you may need to
verify your VPI, VCI, type of encapsulation and type of
multiplexing settings with the ISP.
8.
I cannot get a WAN IP address from the ISP.
STEPS CORRECTIVE
ACTION
1
The ISP provides the WAN IP address after authenticating you.
Authentication may be through the user name and password,
the MAC address or the host name.
2
The username and password apply to PPPoE and PPoA
encapsulation only. Make sure that you have entered the
correct Service Type, User Name and Password (be sure to use
the correct casing).