MicroNet Technology SP3367A - Manual (Page 13)

12
2.3 The Rear Ports
Connector Description
Antenna
Connector
Reverse SMA connector
Reset
The reset button, the router restore default
settings when press until reboot
POWER Power connector with 12VDC/ 1 Ampere
LAN (1-4)
Router is successfully connected to a device
through the corresponding port (1, 2, 3 or 4). If
the LED is flashing, the Router is actively
sending or receiving data over that port.
ADSL
The RJ-11 connector allows data communication
between the modem and the ADSL network
through a twisted-pair phone wire