Chapter 5 troubleshooting – MicroNet Technology SP3367A User Manual
Page 57

56
Chapter 5 Troubleshooting
1.
The LAN LED on the front panel does not light up.
STEPS CORRECTIVE
ACTION
1
Check the Ethernet cable connections between your ADSL2+
Router and the computer or hub.
2
Check for faulty Ethernet cables.
3
Make sure your computer’s Ethernet card is working properly.
4
If these steps fail to correct the problem, contact your local
distributor for assistance.
2.
The ADSL LED on the front panel does not light up.
STEPS CORRECTIVE
ACTION
1
Check the telephone wire and connections between ADSL2+
Router DSL port and the wall jack.
2
Make sure that the telephone company has checked your
phone line and set it up for DSL service.
3
Reset your ADSL line to reinitialize your link to the DSLAM.
4
If these steps fail to correct the problem, contact your local
distributor for assistance.