MicroNet Technology SP3367A User Manual
Page 60
59
5.
I forget my login username and/or password.
STEPS CORRECTIVE
ACTION
1
If you have changed the password and have now forgotten it,
you will need to upload the default configuration file. This will
erase all custom configurations and restore all of the factory
defaults including the password.
2
Press the Reset button for five seconds, and then release it.
When the LAN LED begins to blink, the defaults have been
restored.
3
The default username is “admin”. The default password is
“admin”. The Password and Username fields are
case-sensitive. Make sure that you enter the correct password
and username using the proper casing.
4
It is highly recommended to change the default username and
password. Make sure you store the username and password in
a save place.
6.
Internet connection disconnects.
STEPS CORRECTIVE
ACTION
1
Check the schedule rules.
2
If you use PPPoA or PPPoE encapsulation, check the idle
time-out setting.
3 Contact
your
ISP.