MicroNet Technology SP3367A - Manual (Page 18)

17
Chapter 3 Connection
3.1 Determine connection settings
Before configure the router, you need to know the connection information
supplied by your ADSL service provider.
3.2 Connecting the Router to network
Unlike a simple hub or switch, the setup of the ADSL Router consists of
more than simply plugging everything together. Because the Router acts
as a DHCP server, you will have to set some values within the Router and
also configure your networked PCs to accept the IP Addresses the Router
chooses to assign to them. Generally, there are several different operating
modes for your applications. Your ISP will tell you which mode is
necessary for your system. The modes available are router, bridge,
PPPoE+NAT and PPPoA+NAT.
3.3 The relative configuration on PC
Please follow the steps instructed below when installing your system for
the first time via web console:
1) Shut down the power on everything, including your PCs and ADSL
Router.