MicroNet Technology SP3367A User Manual
Page 58
57
3.
I cannot access the web management.
STEPS CORRECTIVE
ACTION
1
Make sure you are using the correct IP address of ADSL2+
Router. Check the IP address of ADSL2+ Router.
2
Your computer and ADSL2+ Router’s IP addresses must be on
the same subnet for LAN access.
3
If you have changed ADSL2+ Router’s LAN IP address, then
enter the new one as the URL.
The following procedures will help you to check the current IP Address
setting of your computer. You can compare if your computer and router’s IP
Addresses are in the same subnet.
Step 1: Click “Start” and select “Run”.
Step 2: Type in “cmd” and click “OK”.
Step 3: Type ipconfig /all and click enter.