Siemens HF25M5L2 - Manual (Page 26)

26
The stored settings for your dish can be started at
any time.
1. Press the Ž button.
Your appliance is ready for use.
2. Press the j or k button.
The stored settings are displayed.
3. Press the Start button.
The memory starts. The cooking time x counts
down in the display.
Notes
Once the appliance has been started, you can no
longer change the memory location.
The programmes which have been set also remain
stored if there is a power cut.
A signal sounds. The memory has finished.
Use the Ž button to switch off the appliance or
make new settings. You can cancel the acoustic
signal before it sounds using the 0 button.
Press the STOP button or open the appliance door.
Cooking is paused. Press the start button once you
have closed the appliance door. The programme will
then continue.
Starting the
memory function
The cooking time has
elapsed
Pausing