Siemens HF25M5L2 - Manual (Page 22)

22
6. Press the start button.
The programme starts. The cooking time x
counts down in the display.
A signal sounds. The programme has finished,
the appliance no longer heats.
Use the Ž button to switch off the appliance or
make new settings. You can stop the acoustic signal
early by pressing the 0 button.
Press the stop button twice or use the Ž button to
switch off the appliance.
Once the oven has started, the programme number
and weight cannot be changed.
With automatic programmes, you cannot change the
cooking time.
Take the food out of its packaging and weigh it. If it is
not possible to enter the exact weight, you should
round it up or down.
Place the food in a shallow, microwaveable dish,
e.g. a glass or china plate. Do not cover the dish.
Place the food in the cold appliance.
A table of suitable food with weight ranges and
accessories required can be found after the tips.
It is not possible to set a weight outside the weight
range.
With many dishes, a signal sounds after a certain
time. Turn or stir the food.
If possible, freeze and store food flat and in portions at
Ć18 ºC.
Put the frozen food on a flat dish, e.g. a glass or
porcelain plate.
After defrosting, allow the food to defrost for a further
10 to 30 minutes until it reaches room temperature.
Programme has finished
Cancelling the programme
Changing the programme
Changing the cooking time
Notes on automatic
programming
Defrosting