Mark Levinson N 51 - Manual (Page 49)

3-13
Nº51 Media Player Setup Menu
Note The A/V Sync Delay parameter applies to the analog audio outputs
(2-Ch and 5.1 channel outputs), and also to any digital output (S/
PDIF or HDMI) that is set to PCM. The A/V Sync Delay parameter
does not have any effect on digital outputs (S/PDIF or HDMI) that is
set to Encoded, since DRC is a function of the audio decoder (the
surround processor that receives the encoded data stream from the
Nº51 Media Player.
Reset Audio Settings Use the Reset Audio Settings option to reset all audio settings in
the Audio setup menu to their original settings.
To reset audio settings:
Using the remote control left or right button, highlight the desired
setting and press enter. It takes approximately 20 seconds until the
original settings are restored.
Parameter Default Possible Settings
Reset Audio Settings Yes Yes, No
Setup Audio
Outputs
Volume Control
A/V Sync Delay
0ms
Reset Audio Settings