Mark Levinson N 51 - Manual (Page 38)

3-2
Setup Menu Mark Levinson
Setup Menu Navigation (continued)
To select a menu item:
1. Press the remote control or front-panel setup button.
2. Using the remote control up or down button, highlight the
desired menu item. The highlighted item appears in a larger
font size.
3. When the desired menu item is highlighted, press the enter
button to select the highlighted item.
• If a menu option is selected, another menu will open. For
example, selecting the audio option from the Setup menu,
opens the Audio menu.
• Parameters utilizing a horizontal slider indicate the
parameter’s current position within the entire parameter
range.
To adjust a parameter using a slider:
1. When the slider appears, press the remote control left or right
buttons to decrease or increase the parameter setting in the
designated increments.
2. When the desired adjustments have been made, press the
remote control enter or return button to close the slider.
3. Repeatedly press the return button to back out of the menu
structure, or press the setup button to close the menu structure.
Brightness 0