Mark Levinson N 51 - Manual (Page 48)

3-12
Setup Menu Mark Levinson
Power On Volume (Setup : Audio : Volume Control : Power On Volume)
Power On Volume sets the volume level to the selected value when
the Nº51 Media Player is powered-on.
To set the Power On Volume:
Using the remote control up or down button, highlight the desired
setting and press enter.
• When Last Level is selected, the Nº51 Media Player automatically
sets the volume level to the last volume level used during the
previous operating session.
• When the Volume parameter is set to Fixed, the Power On
Volume parameter is not available and appears grayed-out.
Mute Level Reduction (Setup : Audio : Volume Control : Mute Level
Reduction)
Mute Level Reduction allows you to customize the amount of atten-
uation that occurs when the Mute button is pressed. The factory
default setting is -30dB. You can select a value between -10 to -40dB
in 10dB increments or Full Mute.
To set the Mute Level Reduction:
Using the remote control up or down button, highlight the desired
setting and press enter.
• When Full Mute is selected, the volume level is fully attenuated
when the Mute button is pressed.
A/V Sync Delay Use the A/V Sync Delay option to synchronize the audio with the
video. With some video processing systems, a delay between the
audio and video may occur.
To set A/V Sync Delay:
Using the remote control left or right buttons, decrease or increase
the parameter setting until the audio and video are in sync.
Parameter Default Possible Settings
A/V Sync Delay 0 0-110 ms
Setup Audio
Outputs
Volume Control
A/V Sync Delay 0ms
Reset Audio Settings