Mark Levinson N 51 - Manual (Page 14)

1-6
Getting Started Mark Levinson
This dedicated output is provided to ensure a video output that is compatible
with the front panel display of the N
o 40 is always available, even when
the primary video output is configured for a higher resolution
setting (for example, 1080i).
Analog Audio
Configurations
5.1 Analog Audio Outputs Direct to Power Amplifier
• Set the Volume Control : Volume parameter to “Variable” to
directly control the signal level to the power amp using the
Nº51 remote (page 3-11).
• Multichannel audio is output using the “6 Channel Analog
Output” connectors. Select Analog Audio Preferences : 5.1 CH
to configure multichannel audio preferences.
5.1 Analog Outputs to Digital Audio Processor
• Set the Volume Control : Volume parameter to “Fixed” to output a
fixed line-level signal, and use the Nº40 to control the volume level
(page 3-11).
N o 51 Media Player
Analog Outputs
Mark Levinson Amplifiers
(5) Channels
L R C LS RS
Subwoofer
SUB
* For analog output to control the volume, the N o 51 Volume parameter
must be set to Variable.
N o 51 Media Player
Analog Outputs
Mark Levinson
Processor*
L R C LS RS SUB
* Use optional 6-channel analog input card on the Mark Levinson N o 40
Media Processor. Contact an authorized Mark Levinson dealer for assistance.