Motorola GP68 - Manual (Page 14)

Model ST-865M3 SmarTrunk II™ Logic Board
14
1.4.2 Memory Speed Dialing
This procedure is used for dialing a telephone number or
subscriber ID number that is stored in the speed dial memory:
a. Press the * key.
b. Enter the memory speed dial location (0-9).
c. Hear a beep followed by the phone system signal-
ling.
d. Wait for the called party to answer the call.
Example: To call a telephone number from the speed dial
memory location 6, enter the
following sequence: * 6.
1.4.3 Programming Memory Speed Dial
Numbers
The following procedure is used for programming a tele-
phone number or subscriber ID number into the ST-865M3
speed dial memory.
a. Press and hold the * key until a beep is heard.
b. Enter a memory speed dial location.
c. Enter the telephone number or subscriber ID number
that you wish to program into the speed dial memory.
d. Enter the routing code.
e. Press the * key to complete the programming se-
quence.
Example: To program the speed dial memory location 3
with the telephone number 555-6666 routed to
landline one, enter the following sequence:
*(hold), after the beep, 3 5 5 5 6 6 6 6 1 *
Up to fourteen digit telephone numbers may be programmed.
The ability to program speed dial numbers can be disabled
by the dealer.