Motorola GP68 - Manual (Page 13)

1 • Operation
13
Table 1-2 and the following paragraphs summarize the advanced dialing
modes available:
Table 1-2 • Dialing Modes
1.4.1 Store And Send Dialing
This is the normal method of placing a telephone call.
a. Enter the telephone number, or subscriber ID number
on the radio front panel numberic keypad.
b. Enter the routing code for the destination of the call.
c. Press the * key.
d. Hear a beep followed by the phone system signal-
ling.
e. Wait for the called party to answer the call.
Example: To dial the telephone number 633-8899 on
Landline 1, enter the following sequence:
6 3 3 8 8 9 9 1 *
Up to fourteen digit telephone numbers may be entered.
Dialing Mode Procedure
Store and Send Dialing (number to dial) + (routing code) + *
Memory Speed Dialing * + (memory location)
Programming Speed Dial Memory * (hold until beep) + (memory location) +
(The ability to program speed dial (number to store) + (routing code) + *
numbers can be disabled by the dealer).
Redial Mode * + *
Priority Call Overide * + * (hold until beep)