MITSUBISHI ELECTRIC DIAMOND PRO 900U NFJ9905SKHUW - Manual (Page 31)

- 1-30 -
ENGLISH
Degauss Button
4.3 USB Monitor Control
You can do monitor screen adjustments from your computer through the USB function equipped to the
monitor, with the following procedure.
(1) Open “display” in “control panel” to get “display property”.
Select “USB monitor” tab.
(2) Click the adjustment item and adjust with the horizontal and/or vertical slide bar.
(Example of OSD Display)
Vertical Slide Bar
Horizontal Slide Bar
In case of connecting one or more monitors in series, you can select a monitor
which you want to adjust.
Adjustment Item
To select a back-
ground pattern for
testing
(3) Click “OK” or “APPLY” to save the new
screen data.
Or click “CANCEL” or “ ” button not to
save. In case that “CANCEL” or “X” is
clicked, the right message appears. Click
“NO” to restore the old screen data.