English, 2 adjustment items – MITSUBISHI ELECTRIC DIAMOND PRO 900U NFJ9905SKHUW User Manual
Page 27
- 1-26 -
ENGLISH
CONTRAST
Adjusts to the desired contrast level.
X
X
BRIGHT
Adjusts to the black level of the screen
X
X
COLOR TEMPERATURE
Adjusts the color temperature of the screen image.
X
X
H-SIZE
Adjusts the horizontal size of the image on the screen.
X
X
H-PHASE
Adjusts the horizontal position of the image on the screen.
X
X
V-SIZE
Adjusts the vertical size of the image on the screen.
X
X
V-POSITION
Adjusts the vertical position of the image on the screen.
X
X
PCC-AMP
Straightens the left and right sides of the screen image.
X
X
PCC-PHASE
Adjusts the parallelism of the left and right sides of the
X
X
screen image.
PCC-CENTER
Adjusts the pincushioning near the vertical center of the
X
X
screen.
TOP-PCC
Adjusts the pincushioning at the top corners of the
X
X
screen.
BOTTOM-PCC
Adjusts the pincushioning at the bottom corners of the
X
X
screen.
PIN-BALANCE
Adjusts the curvature of the left and right sides of the
X
X
screen image.
KEY-BALANCE
Adjusts the vertical slant or tilt of the screen image.
X
X
TOP-BALANCE
Adjusts the partiality on the top of the screen image.
X
X
ROTATION
Adjusts the rotation or twist of the picture.
X
GEOMETRY RESET
Restore to factory preset level.
H-STATIC
Adjusts the horizontal alignment of the red, green and
X
X
blue beams.
V-STATIC
Adjusts the vertical alignment of the red, green and blue
X
X
beams.
MOIRE CANCEL LEVEL
Adjusts the moire level on the screen.
X
X
CORNER PURITY (TL)
Adjusts the purity of the top-left corners of the screen.
X
X
CORNER PURITY (TR)
Adjusts the purity of the top-right corners of the screen.
X
X
CORNER PURITY (BL)
Adjusts the purity of the bottom-left corners of the screen.
X
X
CORNER PURITY (BR)
Adjusts the purity of the bottom-right of the screen.
X
X
CLAMP PULSE POSITION
Use this function to eliminate excessive green or white
X
background that may occur when both Sync-On-Green
and external sync signals are applied to the monitor.
VIDEO LEVEL
Selects video level 1.0V or 0.7V.
X
DEGAUSS
Eliminates possible color shading or impurity.
POWER-SAVE
When adjusting ON, reduces the power consumption of the
X
monitor when not in use.
CONTROL LOCK
Lock the OSD function to keep the OSD screen you desired.
X
OSD POSITION
Move the OSD screen position.
X
DIAGNOSIS
Indicate current Scanning frequency and factory or user
preset timing number.
LANGUAGE
Select the language used on OSD screen.
X
USB UP-STREAM
Select the Upstream port which you want to use.
X
USB PORT COMBINATION Selects the combination of the Upstream port and signal
X
input connector.
Items
Function
A B C D
A. Press "GEOMETRY RESET" to restore to the factory preset level.
B. Press and buttons together, to restore to the factory preset level.
C. Available to set for each signal timing.
D. Setting does not change by the change of the signal timing.
4.2
Adjustment Items
X:
Available