3 access control – MicroNet Technology SP907NL User Manual
Page 41
38
WEP Key
Please input the WEP encryption key in this field when ‘WEP’
is selected. There are 2 types of WEP key: Hex (number 0 to
9, and ASCII characters A to F) and ASCII (all alphanumerical
characters plus symbols). Please select the type of WEP key
first, and then input the WEP key according to the type of
WEP key selected.
If users want to use WEP 64 bits encryption, please input 10
characters for HEX and 5 characters for ASCII. If users want
to use WEP 128bits encryption, please input 26 characters for
HEX and 13 characters for ASCII. 128 bits encryption is safer
than 64 bits, but the data transfer speed will be slightly
reduced.
Show Password
Check this box and the WPA pre-shared key or WEP key
inputted will be display and not replaced by asterisk (*).
When you finish with setting and want to save changes, click
click
4.3 Access
Control
If users are not going to open the computer and wireless resources to the
public, they can use MAC address filtering function to enforce the access
control policy. So only the MAC address included by the ACL can connect to
the device.