MicroNet Technology SP907NL User Manual

Page 23

to the access point. Otherwise, users can press refresh button to rescan access

points. Select the access point if it’s shown, then click .

Step 6. If the wireless access point uses encryption, users will have to input the

correct WEP passphrase or WPA pre-shared key. Ensure both the AP and PC

is set with the same WEP passphrase/WPA pre-shared key. Otherwise the

wireless connection will fail to establish.

If the access point selected does not use encryption, users will not be prompted

for security key or passphrase.

Step 7. If users can see this message, the connection between the computer

and wireless access point is successfully established.