Microtek MKT-1300a - Manual (Page 68)

$
A2: The camera is not connected to the computer.
• Make sure one end of the USB cable is connected to your
computer and the other end to your camera’s USB connector.
• Check if “Camera Driver” has been installed on your computer.
Go to the Windows Control Panel and double-click on Add/Remove
Programs. If camera driver does not appear in the list, you must
install camera driver from the Microtek CD-ROM.
• Check if the camera is detected by your system.
a) Right-click the “My Computer” icon and click Properties. The
“System Properties” window appears.
b) Click the Hardware tab and then click the Device Manager
button. Expand the “Imaging Device” tree. You should see the
camera in the list.
For Macintosh:
System cannot find the newly
created icon (Take-it or Take-it.SD)
on the desktop.
A1: The Mode switch is set to the incorrect mode.
• Set the Mode switch to (Playback).
A2: The camera is not connected to the computer.
• Make sure one end of the USB cable is connected to your computer
and the other end to your camera’s USB connector. (See page 48.)
A1: The Mode switch is set to the incorrect mode.
• Set the Mode switch to (Photo).
A2: The camera is not connected to the computer.
• Make sure one end of the USB cable is connected to your computer
and the other end to your camera’s USB connector.
• Check if “Camera Driver” has been installed on your computer.
The camera does not operate in PC/
Web Cam mode.