Microtek MKT-1300a - Manual (Page 27)

Shooting
Shooting Still Images
Follow these instructions when
shooting a still image:
1.Set the Mode switch to
(Photo).
Settings are automatically
adjusted and displayed on the
LCD screen.
3.Press the Shutter button.
The still image is taken when a
beep sounds. Do not move the
camera until you hear the beep.
The camera is ready to take
another picture when a
message “BUSY” disappears
from the LCD screen.
NOTE:
• Minimum distance between the
lens and your subject must be
1m.
• Take care when shooting the
following subjects as they are
difficult to bring into focus:
- Low contrast subjects such as a
flat white surface
- Flat, smooth objects
- Quickly moving objects
- Subjects that are dimly
illuminated
- Reflective surfaces
- Subjects in locations with heavy
backlighting
For best results, focus on a
separate object that is near your
subject and then shoot the
picture.
The following icons are default display
settings showed on the LCD screen when
you shoot a still image.
Photo Mode displays the currently
selected mode.
Image Size displays the currently
selected image size.
Quality (Compression) displays the
current image quality.
Flash Mode displays the flash
setting.
Battery Status Indicator shows the
remaining battery charge.
SD indicates whether a
SecureDigital card is inserted.
76 Number of pictures remaining
indicates the number of shots
available.
2.Frame the subject using the LCD
screen.