Microtek MKT-1300a - Manual (Page 34)

%
Selecting the Shooting
Drive Mode
This mode enables you to
determine how you want to shoot
your still images. The following
shooting drive modes are available:
•
(Single): Enables you to shoot
single still images. This is the
default mode. (p.20)
• (Continuous): Enables you to
take three still images in
sequence at a single press of the
Shutter button. (p.23)
• (Self-timer): Enables a 10-
second delay after pressing the
Shutter button before the picture
is taken. (p.24)
To select the driver mode setting,
1.Set the Mode switch to
(Photo).
2.Press the MENU button.
3.Use the 4-way arrow buttons to
select “DRIVE MODE”, then
select from among , , or
.
4.Press the MENU button to
confirm the setting and exit the
menu.
5.Press the Shutter button to take
the shot.
Single
Continuous
Self-timer