Microtek MKT-1300a - Manual (Page 23)

$
Formatting the SD Card
After you install an SD card for the
first time, you should first format
the SD card with the camera.
Formatting removes all information
that existed previously on the SD
card.
1.Set the Mode switch to any
operation mode.
2.Press the MENU button.
3.Use the / arrow buttons to
enter Setup menu mode ( ).
4.Use the / arrow buttons to
select ”FORMAT”.
5.Press the Shutter (OK) button.
A screen appears to allow you
to format the installed SD card
or to cancel.
6.Use 4-way arrow button to
select “OK”, then press the
Shutter (OK) button.
The SD card is formatted.
When formatting is completed, the
LCD screen returns to the selected
mode screen.
When selected, the “OK?”
setting appears as well and is
highlighted in red, allowing you
to format the installed SD card.