Introduction, Scanning sequence examples, Errors while scanning – Motorola SYMBOL LS9203 User Manual

Page 285: Miscellaneous default parameters

Miscellaneous Scanner Options

10-3

Introduction

This chapter includes commonly used bar codes to customize how your data is transmitted to your host device. In addition to these
bar codes for data formatting, refer to each host chapter for the appropriate host connections and host device features for your
scanner. Refer to

Chapter 9, Symbologies

and the Advanced Data Formatting Programmer Guide for customizing data for transmission

to your host device.

Before programming, follow the instructions in

Chapter 1, Getting Started

Your scanner is shipped with the settings shown in the

Miscellaneous Scanner Options Default Table on page 10-3

(also see

Chapter

A, Standard Default Parameters

for all host device and miscellaneous scanner defaults). If the default values suit your requirements,

programming may not be necessary. Features values are set by scanning single bar codes or short bar code sequences.

Scanning Sequence Examples

In most cases you need only scan one bar code to set a specific parameter value.

Parameters, such as Prefix Value, require that you scan several bar codes in the proper sequence. Refer to each individual parameter
for descriptions of this procedure.

Errors While Scanning

Unless otherwise specified, if you make an error during a scanning sequence, just re-scan the correct parameter.

Miscellaneous Default Parameters

Table 10-1

lists the defaults for miscellaneous scanner options parameters. If you wish to change any option, scan the appropriate

bar code(s) provided in the Miscellaneous Scanner Parameters section beginning on page

10-4

See

Chapter A, Standard Default Parameters

for all user preferences, hosts, symbologies, and

miscellaneous default parameters.

Table 10-1. Miscellaneous Scanner Options Default Table