Set lengths for codabar (continued) – Motorola SYMBOL LS9203 User Manual
Page 263
Symbologies
9-83
Set Lengths for Codabar (Continued)
Length Within Range - This option allows the scanner to decode a Codabar symbol with a specific length range. The
length range is selected from numeric bar codes beginning on page
Appendix D, Numeric Bar Codes.
For example, to
decode Codabar symbols containing between 4 and 12 characters, first scan Codabar - Length Within Range. Then scan 0, 4,
1, and 2 (single digit numbers must always be preceded by a leading zero). If an error is made or to change a selection, scan Cancel
on page
.
Codabar - Length Within Range
Any Length - Scanning this option allows the scanner to decode Codabar symbols containing any number of characters within the
scanner capability.
Codabar - Any Length