Decode upc/ean supplementals, Decode upc/ean supplementals -15 – Motorola SYMBOL LS9203 User Manual
Page 195
Symbologies
9-15
Decode UPC/EAN Supplementals
Supplementals are bar codes appended according to specific format conventions (e.g., UPC-A+2, UPC-E+2, EAN 13+2). The following
options are available:
•
If you select Ignore UPC/EAN with Supplementals, and the scanner is presented with a UPC/EAN plus
supplemental symbol, the scanner decodes UPC/EAN and ignores the supplemental characters.
•
If you select Decode UPC/EAN with Supplementals, the scanner only decodes UPC/EAN symbols with supplemental
characters, and ignores symbols without supplementals.
•
If you select Autodiscriminate UPC/EAN Supplementals, the scanner decodes UPC/EAN symbols with supplemental
characters immediately. If the symbol does not have a supplemental, the scanner must decode the bar code the number of
times set via
UPC/EAN Supplemental Redundancy on page 9-24
before transmitting its data to confirm that there is no
supplemental.
•
If you select one of the following Supplemental Mode options, the scanner immediately transmits EAN-13 bar codes
starting with that prefix that have supplemental characters. If the symbol does not have a supplemental, the scanner must
decode the bar code the number of times set via
UPC/EAN Supplemental Redundancy on page 9-24
before transmitting its
data to confirm that there is no supplemental. The scanner transmits UPC/EAN bar codes that do not have that prefix
immediately.
• Enable 378/379 Supplemental Mode
• Enable 978/979 Supplemental Mode
If you select 978/979 Supplemental Mode and are scanning Bookland EAN bar codes, see
to enable Bookland EAN, and select a format using
.
• Enable 977 Supplemental Mode
• Enable 414/419/434/439 Supplemental Mode
• Enable 491 Supplemental Mode
• Enable Smart Supplemental Mode - applies to EAN-13 bar codes starting with any prefix listed previously.
• Supplemental User-Programmable Type 1 - applies to EAN-13 bar codes starting with a 3-digit user-defined prefix.
Set this 3-digit prefix using Supplemental User-Programmable 1.
• Supplemental User-Programmable Type 1 and 2 - applies to EAN-13 bar codes starting with either of two 3-digit
user-defined prefixes. Set the 3-digit prefixes using Supplemental User-Programmable 1 and Supplemental User-
Programmable 2.
• Smart Supplemental Plus User-Programmable 1 - applies to EAN-13 bar codes starting with any prefix listed
previously or the user-defined prefix set using Supplemental User-Programmable 1.
• Smart Supplemental Plus User-Programmable 1 and 2 - applies to EAN-13 bar codes starting with any prefix listed
previously or one of the two user-defined prefixes set using Supplemental User-Programmable 1 and Supplemental
User-Programmable 2.
•
Select Supplemental User-Programmable 1 to set a 3-digit prefix. Then select the 3 digits using the numeric bar codes
beginning on page
•
Select Supplemental User-Programmable 2 to set a second 3-digit prefix. Then select the 3 digits using the numeric bar
codes beginning on page
To minimize the risk of invalid data transmission, select either to decode or ignore supplemental characters.
Note
Note