MITSUBISHI ELECTRIC LT-2220 - Manual (Page 41)

41
Channel
(Figure 22)
Select to edit the channel selections. You can add or
delete from memory, name, or add to the SQV (Super
Quick View™) list.
After selecting Channel, editing can be done using the
Adjust buttons or entering the  digit channel number
you want to change (Example  for channel ).
CHANNEL EDIT Menu: Channel, Memory, Name Selection
Figure 22. Channel
Figure 23. Memory
Figure 24. Name
Memory
(Figure 23)
Add weaker channels viewed with ANT and delete
unwanted channels, after all available channels have
been memorized with Memorize Channels (page ).
Use the CH (channel) button on the remote control to
view memorized channels.
Name
(Figure 24)
Name channels shown on ANT (up to four
characters). After you enter a name, it will appear on
the TV screen next to the channel number.
1. Select the memorized channel you want to name.
2. Press ADJUST until you see the
underline highlighted in the Name field.
3. Use ADJUST or to select letters A-Z,
numbers 0-9, and/or symbols (!.&’/:*- and blank)
for each character of the name you would like for
the selected channel. Press ENT after choosing
each letter and after the name is complete. If you
want to change your selection while on the option
field, use CANCEL to delete the current character.
You will move one position back. If you press
CANCEL while at the first character, the entire
name will be deleted.