MITSUBISHI ELECTRIC LT-2220 - Manual (Page 15)

15
Cable Box
(Figure 3)
1. Connect the incoming cable to ANT on the
TV side panel.
NOTE: If your cable box has separate audio/video
outputs, please see Composite Video with
Audio or S-Video with Audio, page 16
(Figure 6).
Note: If you have a digital cable box, refer to your
Digital Cable Box owner’s guide for instructions on
optimal connections to this TV.
Note: The TV side panel and connections shown here are for reference only and may vary by model.
Connecting an Antenna to a Cable Box or VCR
Antenna or Wall Outlet Cable
(Figure 4)
1. Connect the incoming cable to ANT on the TV
side panel.
NOTE: If your cable box has separate audio/video
outputs, please see Composite Video with
Audio or S-Video with Audio, page 16
(Figure 6).
Figure 4. Connecting the VCR with antennas or wall
outlet cable.
Figure 3. Connecting the cable box.
Note: See page 5 for Outdoor Antenna grounding.
Incoming Cable
1
2
TV side panel (section detail)
AUDIO OUT AUDIO IN VIDEO OUT
(Y/C)
MONITOR
1
L
R
L
R
1 2
IN
OUT
Antenna
VCR back panel (section detail)
2
OUT
Cable Box back panel
(section detail)
IN
1
TV side panel (section detail)
2
2
Incoming Cable