Motorola I296 - Manual (Page 61)

57 Talk Around
Note: The Talk Around tone consists of 4
rapid beeps.
2 Release the PTT button to listen.
If you receive an error message:
• No one is on your channel or code.
• You are out of range.
receiving code calls
When you receive a code call, Receive will
appear on the display. After hearing the Talk
Around tone, you have 6 seconds to reply
before the call times out.
To reply to the call, press the PTT button.
Note: An incoming Talk Around call can be
terminated at any time by pressing @.
receiving all Talk Around calls
If you set the code to Receive All, your phone
can receive Talk Around transmissions from
any phone that is set to the same channel,
regardless of the code (1-15). When you
receive transmissions with the code set to
Receive All, the code that the transmission was
received on will replace Receive All on the
display.
Note: You cannot initiate a code call when the
code is set to Receive All.
To set the code to Receive All:
1 From the Talk Around home screen, press
K under Edit.
2 Scroll to Code.
3 Press K under Edit.
4 Select Receive All.
5 When you are finished, press K under
Back to return to the Talk Around home
screen.
To reply to a call with the code set to Receive All: