MITSUBISHI ELECTRIC M341i - Manual (Page 66)

66-
Settings
The following features are reset:
GSM SERVICES
CALL DIVERTING
This Network dependent service allows you to divert incoming calls (voice, fax or data calls) to
another number
To divert a call:
To check the call divert status or deactivate it:
To cancel all call diverts,
FEATURE DEFAULT SETTING
Alert Modes Ring
Volumes, Ring, Key, Speech, Alarm Mid values
Backlight, Contrast Mid value
Any Key, Auto-Retry, Auto-Answer
features
Off
Active flip On
Ramping Off
1 Press OK . Select Settings .
2 Select GSM Services .
3 Select Call diverting . The following sub-menu is displayed (N.B.: the contents of this menu
may vary according to your service provider).
DIVERT OPTIONS ACTION
Always To divert all incoming voice calls.
When not
reachable
To divert all voice calls when the phone cannot be reached (out of service).
On no reply To divert all voice calls when the call is not answered.
When busy To divert all voice calls when the line is engaged.
All conditions To divert all voice calls when Not Reachable, No Reply and When Busy.
Cancel all To cancel all diverting options.
All FAX calls To divert incoming fax calls unconditionally.
All DATA calls To divert incoming data calls unconditionally.
4 Select one of these options and select OK .
5 Select Activate .
6 Select Voice Mail (if you want the calls to be diverted to your voice mailbox), Names (select
one of the phonebook entries) or Number (Enter the number to which the calls are to be
diverted and select OK . A validation message containing the selected number is displayed).
1. If the 'On no reply' option is selected, please enter the time limit (5, 15 or 30 seconds; this also depends on
your network) after which the feature is valid.
2. Call diverting must to be set for both Line 1 and Line 2. Only the selected line is affected by the call divert.
1 Press OK . Select Settings .
2 Select GSM Services .
3 Select the call diverting type to be checked or cancelled.
4 Select Status or Cancel .
1 Press OK . Select Settings .
2 Select GSM Services .
3 Select Call diverting .
4 Select Cancel all .
1. This action cancels all call diverts (voice, faxes and data calls) for the current line.
2. To cancel call diverts for the other line, you must select this line first (menu Calls & Times - Line selection).