MITSUBISHI ELECTRIC M341i - Manual (Page 32)

32-
Calls & Times
To set call cost type to units:
SETTING THE CREDIT LIMIT
(
SUBSCRIPTION DEPENDENT
)
You may also be able to set a credit limit to your calls. Once the credit limit has been reached,
no more chargeable outgoing or incoming calls are allowed. You can however still make emer-
gency calls.
The PIN2 code is required to set the credit limit.
SHOW COSTS
CALL COSTS - RESETTING ALL COSTS TO ZERO
To reset all call costs to zero:
ALTERNATE LINE SERVICE
-
SELECTING LINE
2 (
SUBSCRIPTION DEPENDENT
)
Some operators support the use of a second line. You may then have two mobile phone numbers
(e.g. a business line plus a personal line). To use them you need to select the line to be used.
RECORDED CALL
This submenu allows you to play the recorded phone calls. If several phone conversations have
been recorded, they are played one after another.
1 Press OK . Select Calls & Times .
2 Select Call costs .
3 Select Display cost type .
4 Select Units .
When the cost type is set to units, the credit limit and the remaining credit are shown in units.
1 Press OK . Select Calls & Times .
2 Select Call costs .
3 Select Credit limit . The display indicates the current credit limit set.
4 Select Edit . Enter your PIN 2 code and press OK .
5 Enter the credit limit (use to enter a decimal point for currencies). Press OK to validate.
When a credit limit has been set, the selection from the 'Credit limit' display is Edit or Set no limit.
1 Press OK . Select Calls & Times .
2 Select Call costs .
3 Select Show .
4 Use up and down arrow keys to display the Last Call and All Calls or show the Remaining
credits .
The remaining credit is shown in either units or currency, as set by Cost Type menu above.
1 Press OK . Select Calls & Times .
2 Select Call costs .
3 Select Reset .
4 Select Yes .
5 Enter the PIN 2 number and press OK .
1 Press OK . Select Calls & Times .
2 Select Line selection .
The current line selection is displayed.
3 Use up and down arrow keys to scroll to the required line. Press OK to validate.
1. The Line selection sub-menu may not be available on your mobile. Please contact your service provider for further details
about this service.
2. Line 1 and Line 2 can be named (Office and Home for instance). Refer to My number menu (see my number(s) display,
page 37). Whichever line is selected to send calls, incoming calls can still be received on either line.
In compliance with European regulations, you are obliged to inform your correspondent before
recording a phone conversation.
1 Select Calls & Times , select Recorded call.