MITSUBISHI ELECTRIC M341i - Manual (Page 37)

37-
Phonebook
To select a group when storing a number:
MY CARD
My Card is a specific storage location where you can enter personal data. You can easily ac-
cess My card and send its contents to another device via the infrared port or SMS.
My Card contents is identical to the phone cards contents except for the Groups and Voice di-
alling fields.
To enter My Card data set:
To send My Card via the Infrared port or by SMS:
MY NUMBER
(
S
)
DISPLAY
The phone can display your main line (Line 1) mobile number, the mobile number for Line 2
(Alternate Line Service) and your data and fax numbers (these are SIM card dependent). These
numbers may be stored in the SIM card. You can also enter them manually.
To view, name and edit your own number(s),
FIXED DIALLING NUMBERS
Fixed dialling is a feature that restricts outgoing calls to 'fixed' numbers or 'prefixes' contained
in SIM cards that support this feature. When the Fixed Dialling Numbers (FDN) feature is acti-
vated, dialling numbers, diverting calls and sending SMS to numbers not registered in the FDN
list is forbidden. The number of FDN entries to be stored depends on the SIM card capacity.
Activating the FDN feature or registering numbers in the FDN list is PIN 2 protected (contact
your service provider to get the PIN 2 number).
The following menu (Fixed dialling) and operations are only available on your mobile if your SIM
card allows fixed dialling.
1 Repeat the Phone names storage procedure (see storing names and telephone numbers,
page 33) and fill in the Phone names card.
2 Scroll down to Groups and select OK .
3 Select one of the displayed groups from the list.
4 Select Save to store your settings.
Groups can only be set for the Phone names cards (not for the SIM names cards).
1 Press OK . Select Phonebook .
2 Select My Card .
3 Select View and enter the requested information as for a phonebook card (validate each
entry by selecting OK ).
4 Select Save to store your card.
1 Press OK . Select Phonebook
2 Select My Card .
3 Select Send by... then select Infrared port : the infrared port automatically opens and sends
the card. Or select SMS , then enter the mobile number to send the card to or select it from
the Names list and press OK .
Press and hold the up arrow key from the standby display to access Send my card by... Infrared port/SMS.
1 Press OK . Select Phonebook .
2 Select My numbers . The mobile number for Line 1 is displayed if it is stored in the SIM card.
If not, select Edit and enter your number and your name in (select OK to save the entered
information).
3 Scroll down to view or enter Line 2, your fax and data numbers.
1. Line 2, data and fax numbers can only be accessed if your SIM card has these subscriptions.
2. My numbers availability depends on your service provider.