Magellan GPS 320 - Manual (Page 50)

42 Magellan GPS 315/GPS 320
MENU
Select
SETUP
ENTER
Select
NAV SCREENS
ENTER
Select
on or off
ENTER
FIG .
A
WPT NAMES
OFF
ON
WPT NAMES
OFF
ON
WPT NAMES
OFF
ON
NAV 1
OFF
ON
The COMPASS screen is displayed next with the same pop-
up menu. You will continue to be prompted for the other
NAV screens.
Selecting a Coordinate System
A coordinate system is provided for you. This option allows
you to select primary and secondary coordinates used for
entering and viewing position information. The most
common is LAT/LON.
MENU
Select
SETUP
ENTER
Select
COORD SYSTEM
ENTER
Select
system
ENTER
FIG .
B
Select
format
ENTER
FIG .
C
WPT NAMES
OFF
ON
WPT NAMES
OFF
ON
WPT NAMES
OFF
ON
COORD SYS
PRIMARY
SECONDARY
If a format is required for the coordinate system you have
chosen, a pop-up menu will be displayed.
WPT NAMES
OFF
ON
WPT NAMES WPT NAMES LAT/LON
DEG/MIN.MM
DEG/MIN.MMM
DEG/MIN/SEC
The default primary coordinate system will be Lat/Lon in
Degrees/Minutes and the default secondary coordinate
system will be UTM.
You will want the receiver to use position
coordinates in the same map datum that is used
by your maps.
Figure A. You can
turn NAV screens
on or off.
Figure B. You can
choose from LAT/
LON, UTM, TD,
OSGB, Irish,
Swiss, Swedish,
Finnish, German,
French, MGRS and
User Grid.
Figure C. You
can choose from
DEG/
MIN.MM,
DEGMIN.MMM
or DEG/MIN/
SEC. The
screen will be
different for
other coordinate
systems.