Magellan GPS 320 - Manual (Page 32)

24 Magellan GPS 315/GPS 320
Editing a User Waypoint
Editing a Selected Waypoint
Editing Waypoint Fields. Follow the instructions on
selecting a waypoint and use the following to edit the
desired fields.
EDIT WPT
34˚06.56N
117˚49.60W
900FT
11:23:35PM
12JUN97
NO CAMP
FIRES
SAVE EDITS
CLEAR MSG
WPT003
MENU
EDIT WPT
SORT WPT
DELETE WPT
PROJECTION
WAYPOINTS
ROUTES
SETUP
SUN/MOON
FISH/HUNT
CONTRAST
ALARM/MSG
Figure A. This menu
allows you to select
the edit waypoint
mode. Only User
waypoints can be
edited.
Select
data field
ENTER ENTER
Make
changes FIG .
B
From any
NAV screen
MENU
Select
WAYPOINTS ENTER
Select
waypoint
MENU
Select
EDIT WPT
ENTER
FIG .
A
Select User
category
ENTER
Figure B. You may
change any of the
data fields in this
screen.
Creating a User Waypoint
A waypoint is a recorded position that can be used in a route
or a GOTO. You can save up to 500 user waypoints in your
receiver. You can create a waypoint with a receiver-generated
name (WPT001, WPT002, WPTxxx) by pressing:
MARK MARK
To create a waypoint with a name of your choice or if you wish
to change any data field while entering a waypoint, use the
following:
MARK ENTER
Select
data field MARK
Make
changes
ENTER
As you are working with waypoints, you will notice that the
cities (non-user waypoints) are divided into categories. This
division is based on the population of the city using the
following guidelines:
Major city 500,000+
Large city 100,000 – 500,000
Medium city 20,000 – 100,000
Small city * Less than 20,000
* available in DataSend CD.