beautypg.com

Volume, Navigation key, Codes & passwords – Motorola C139 User Manual

Page 15: Lock & unlock phone, Check battery meter, Reading nokia smart message with imelody, Reading nokia smart message with vcard

background image

38

basics

symbol mode

Press a keypad key to show its symbols at the bottom of the
display.

Highlight the symbol you want, then press the SELECT key.

volume

When you are in a call, press S right to increase earpiece
speaker volume, left to decrease it. When the phone display
is idle, press S right or left to increase or decrease the
ringer volume.

Tip: During a call, you can set your phone to mute by
pressing M > Mute.

navigation key

Press the navigation key S up or
down to scroll and highlight options.

codes & passwords

Your phone's 4-digit unlock code is originally set to 1234. If
your service provider did not change these codes, you should
change them:

Find it: Press M > Settings > Security > New Passwords

You can also change your SIM PIN or Bar Password.

39

basics

If you forget your unlock code: Try entering 1234 or the last
four digits of your phone number.

If you forget other codes: If you forget your SIM PIN code,
PIN2 code, or bar password, contact your service provider.

lock & unlock phone

You can lock your phone to keep others from using it. To lock
or unlock your phone, you need the 4-digit unlock code.

To manually lock your phone:

Press M > Settings > Security > Phone Lock > Lock Now.

To automatically lock your phone whenever you turn it off:

Press M > Settings > Security > Phone Lock > Automatic Lock > On.

You can set up the time amount before the phone
automatically lock.

The options are Off, 30 Seconds, and 1 minute.

Press M > Settings > Security > Auto Key Lock.

Note: You can make emergency calls on a locked phone (see
page 51). A locked phone still rings or vibrates for incoming
calls or messages, but you need to unlock it to answer.

check battery meter

To check your battery meter:

Press M > Settings > Phone Status > Battery Meter.

40

basics

reading Nokia smart message
with iMelody

Find it: Press M > Messages > Text Msgs

To open the Nokia Smart Message:

1

Press S to scroll to the message.

2

Press READ to open the message.

The phone asks Play
Ring Tone?
.

3

Press YES to play the iMelody. (iMelody will play only if
the format is correct. A pop-up screen will notify you
otherwise.) Press No to cancel the playing.

storing iMelody

You can store the iMelody.

1

Press STORE and the file name appears on the display.

2

Press OK to save the iMelody into flash.

Storing your iMelody may fail for two reasons: if the file
name is duplicated, or if the memory is full. If the file name is
duplicated, rename the file under Tone Details. If the memory if
full, replace old ring tones with the new one.

41

basics

reading Nokia smart message
with vCard

Find it: Press M > Messages > Text Msgs

To open the Nokia Smart Message:

1

Press S to scroll to the message.

2

Press READ to open the message.

The phone asks Store vCard?.

3

Press YES to store vCard in the phonebook. (vCard will be
stored only if the format is correct. A pop-up screen will
notify you otherwise.) Press NO if you don't want to store
the vCard.

Note: If your phonebook already is full, the vCard can’t be
stored. If necessary, delete one phone entry before storing
the vCard.