MITSUBISHI ELECTRIC FC810 - Manual (Page 17)

MITSUBISHI ELECTRIC MOTHERBOARD DIVISION PAGE 17 OF 45
The FC810 microATX motherboard accepts the following Celeron™ processors operating at a
bus speed of 66 or 100MHz.
266 4.0 66
300 4.5 66
333 5.0 66
366 5.5 66
400 6.0 66
433 6.5 66
466 7.0 66
500 5.0 100
550 5.5 100
600 6.0 100
The processor core voltages are generated by switched-mode regulators on the motherboard to
the Intel VRM8.2 specification.
The core logic is based around the Intel 810 Graphics and Memory Controller Hub (GMCH) and
the I/O Controller Hub (ICH). The features of each are summarised below.
66/100Mhz system bus frequency
DRAM controller supporting 100Mhz SDRAM main memory 8MB – 256MB and suspend
to RAM (PC100)
Integrated graphics controller with 2D/3D H/W acceleration
3D graphics visual/ textural enhancements
Integrated 24-bit 230MHz RAMDAC
Integrated graphics memory controller with display cache interface – 100Mhz SDRAM
Advanced power management functions - ACPI / APIC