Motorola E398 GSM - Manual (Page 23)

6809480A37-O April 21, 2004 23
Level 1 and 2 Service Manual Disassembly
Removing and Replacing the Keyboard
1. Remove the battery cover, battery, rear housing, and transceiver PC board, as
described in the procedures.
2. Using the disassembly tool, gently pry up the keyboard disconnecting it from
the transceiver PC board as shown in Figure 9.
3. To replace, align the keyboard connector of the keyboard with the keyboard
connector on the transceiver board and press it into place.
4. Replace the transceiver PC board, rear housing, battery, and battery cover as
described in the procedures.
Figure 9. Removing and Replacing the Keyboard
Keyboard
Disassembly Tool