Manitowoc Ice Q 800 - Manual (Page 12)

Installation Instructions Section 2
2-6
Installation Checklist
Is the ice machine level?
Has all of the internal packing been removed?
Have all of the electrical and water connections
been made?
Has the sump trough drain plug been installed?
Has the supply voltage been tested and checked
against the rating on the nameplate?
Is their proper clearance around the ice machine
for air circulation?
Has the ice machine been installed where
ambient temperatures will remain in the range
of 35
° - 110°F (1.7° - 43.3°C)?
Has the ice machine been installed where the
incoming water temperature will remain in the
range of 33
° - 90°F (0.6° - 32.2°C)?
Is there a separate drain for the water-cooled
condenser?
Are the ice machine and bin drains vented?
Are all electrical leads free from contact with
refrigeration lines and moving equipment?
Has the owner/operator been instructed
regarding maintenance and the use of
Manitowoc Cleaner and Sanitizer?
Has the owner/operator completed the warranty
registration card?
Has the ice machine and bin been sanitized?
Before Starting the Ice Machine
All Manitowoc ice machines are factory-operated and
adjusted before shipment. Normally, new
installations do not require any adjustment.
To ensure proper operation, follow the Operational
Checks in this manual. Starting the ice machine and
completing the Operational Checks are the
responsibilities of the owner/operator.
Adjustments and maintenance procedures outlined in
this manual are not covered by the warranty.
WARNING
PERSONNEL INJURY POTENTIAL
Do not operate equipment that has been misused,
abused, neglected, damaged, or altered/modified
from that of original manufactured specifications.