MITSUBISHI ELECTRIC A101 - Manual (Page 16)

2-4 Chapter 2: Installation
2.3.1 Wall mounting
Aside from desktop placement, you
may install the A101 Wireless USB
Adaptor vertically on a concrete or
wooden wall using the mounting
hook at the bottom of the device
and a mounting screw.
To mount the device on a concrete or wooden wall:
1. Locate the mounting hook on the bottom of the device.
2. Select an ideal location for the device following the considerations
mentioned previously.
3. Tighten a round head screw on the concrete or wooden wall until only
1/4” is showing.
4. Latch the device onto the screw.
Mounting hook
Adjust the screw if you cannot latch the device or if the screw is too
loose.