MITSUBISHI ELECTRIC A101 - Manual (Page 15)

Diamond Digital A101 Wireless USB Adaptor 2-3
2.2.2 Installing the device
To install the A101 Wireless USB Adaptor in your computer:
1. Connect one end of the USB
cable to the USB port of the
device.
2. Connect the other end of the
USB cable to the USB port of
your computer.
3. Windows ® automatically detects
the device and displays the
Found New Hardware dialogue
box. Follow the on-screen
instructions to proceed.
4. After completing installation,
configure the A101 Wireless
USB Adaptor using the Wireless Settings utility. Refer to the next
chapter for details.
2
1
2.3 Placement
Take note of the following before placing the device.
• Place the device on a flat, stable surface as far from the ground as
possible
• Keep the device away from metal obstructions and direct sunlight.
• Keep the device away from transformers, heavy-duty motors, fluorescent
lights, microwave ovens, refrigerators and other industrial equipment to
prevent interference and signal loss.