Miller Electric Big Blue 402D - Manual (Page 35)

OM-495 Page 29 Return To Table Of Contents
5-7. Connecting The Battery
1/2 in
−
+
Y Connect Negative (−) Cable Last.
Tools Needed:
802 168-E / Ref. 202 705 / 802 313 / S-0756-C
.
Reinstall cover after connecting battery.
ether1 7/96 − 153 382-A / Ref. 202 705
Y Stop engine.
Y Improper handling or expo-
sure to ether can harm your
health. Follow manufactur-
er’s safety instructions on
cylinder.
Y Do not use Ether Starting Aid
while engine is running.
Remove rubber access plug from
cover.
1
Ether Cylinder
2 Nozzle
Remove cover and clean cylinder
nozzle.
3
Clamp
4 Fitting
5 Cap
6 Valve
Remove cap and clean fitting.
Install cylinder on fitting. Tighten
clamp.
.
After installing cylinder, wait at
least 10 minutes before using
to let ether particles settle and
prevent atomizer plugging.
Put cap on fitting when cylinder is
removed.
Reinstall plug in cover.
1
2
3
4
6
5
5-8. Installing Optional Ether Cylinder (Deutz F3L912 Engine Only)