beautypg.com

Verifying the tv codes – Motorola RG2200 User Manual

Page 44

background image

44

V

ERIFYING

THE

TV C

ODES

To playback the TV code:

For example, code 130 would show as the following:

(represents 1)

(represents 3)

(represents 0)

SRC-300

SRC-200

1.

Press the LED key and hold it down until the LED
flashes rapidly.

2.

Press the INFO key. The LED stops blinking at this
point and stays on solid.

3.

Press and release the C key. The remote is now in play-
back mode.

4.

Observe the LED. The TV code will be indicated by a
blink sequence for each number. See example below.

1.

Press the MUTE button and hold it down until the LED
at the top of the remote control flashes rapidly.

2.

Press the FAV button. The remote is now in playback
mode.

3.

Observe the LED. The TV code will be indicated by a
blink sequence for each number. See example below.

See also other documents in the category Motorola Hardware: