Motorola RG2200 - Manual (Page 30)

30
• Your VCR begins recording.
• The record LED on the front panel of RG2200 turns on.
Note: You cannot change channels while the recording is in progress.
C ANCELLING Y OUR R ECORDING
If you want to cancel a recording in progress:
1. Press SELECT on your remote control.
2. Use the right key to highlight “Cancel.”
3. Press SELECT. Your recording will be canceled.
P ROGRAMMING Y OUR VCR C ODE (O PTIONAL )
Not all NSPs support VCR codes.
1. Turn on VCR.
2. Put a recordable tape into the VCR.
3. Press Menu on the remote control.
The Main Menu is displayed.
4. Use the down (directional) key to highlight “Setup VCR.”
5. Press SELECT.
An options menu is displayed.