Multi-Tech Systems MULTIVOIP MVP-2410 - Manual (Page 504)

Embedded Gatekeeper MultiVOIP User Guide
504
Network Parameter Definitions (cont’d)
Field Name Values Description
Configuration Options
Alias Giving Y/N When an endpoint sends an RRQ
message, the Gatekeeper uses the
additional aliases that were predefined for
the endpoint as online aliases. This
enables the Gatekeeper to assign terminal
alias names through which the terminal
can be accessed by others. The following
are two examples of how this option can
be used:
• Example of Alias Giving for a
Terminal. To make a terminal accessible
by dialing 100, add the alias 100 to the
terminal’s predefined information, and
select the Alias Giving option. When the
terminal sends an RRQ message, the 100
alias becomes a dynamic (online) alias,
and all calls to 100 will be directed to the
terminal.
• Example of Alias Giving for
Gateways. To make all Gateways supply
Service 80, add Service 80 to the Service
Table, add the 80 alias as predefined
information to all registered gateways,
and select the Alias Giving option. When
the gateways register, they will support
Service 80.
Pre-Granted ARQ
PreGrant
ALL Y/N Select to cause the Gatekeeper to send a
pregrantedARQ permission in the RCF
message for each endpoint that wishes to
register. The pregranted ARQ permission
is given to both makeCall and answerCall
with routed mode. When an endpoint re-
ceives the permission, it may start the call
with a Setup message or directly answer
the call with a Connect message.