Multi-Tech Systems MULTIVOIP MVP-2410 User Manual
Page 402
Operation & Maintenance
MultiVOIP User Guide
402
ISDN BRI Statistics: Field Definitions
Field
Name
Values
Description
Select BRI
Interface
ISDNn
For n=1-2 (410ST)
For n-1-4 (810ST)
In this field, you can choose the ISDN port
for which you want to view the status. The
410ST has two ISDN –BRI ports (or
“interfaces”); the 810ST has four ISDN-
BRI ports (or “interfaces”). Each interface
has two channels.
Layer 1 Interface
Status
inactive (F1),
sensing (F2),
deactivated (F3),
awaiting signal (F4),
identifying input
(F5),
synchronized (F6),
activated (F7),
lost framing (F8),
deactive (G1),
pending activation
(G2),
active (G3),
pending
deactivation (G4)
Shows the current Layer 1 status of the
ISDN connection. Each status description
(inactive, sensing, etc.) corresponds to a
particular “state” label (F1-F8 and G1-G4).
State
F1-F8
(for Terminal
mode ports),
G1-G4 (for Network
mode ports)
Shows the I.430 state name for Layer 1. An
“F” state name indicates this port is in
Terminal mode (F1-F8), as set in the
ISDN
BRI Parameters
screen.
A “G” state name indicates that this port is
in Network mode (G1-G4), as set in the
ISDN BRI Parameters
screen.
Loss Of
Framing
integer
Shows the number of lost-framing events on
the ISDN physical layer.
Loss of
Sync
integer
Shows the number of lost-synchronization
events on the ISDN physical layer.