Multi-Tech Systems MULTIVOIP MVP-2410 User Manual
Page 103

MultiVOIP User Guide
Mechanical Installation
103
Network Mode
. When a voip ISDN connector is to be connected to an ISDN
phone station or to an ISDN terminal adapter (TA), select “Network” as the
“Layer 1 Interface” in the ISDN Parameters screen of the MultiVOIP
software. Connect cables between voip ISDN connectors and phone or TA.
NOTE.
Any ISDN phone stations connected to the MVP-
410ST/810ST must provide their own operating power.
That is, the MVP-410ST/810ST does not supply power for
ISDN phone stations.
This manual is related to the following products: